New C-SCP400H38M C-SCP400H38A C-SCP400H38B C-SCP435H38B Scroll Compressors for Refrigeration Air Conditioner Essential Heat Exchange Parts

The copper tube of Sanyo compressor C-SPC360H38B has good thermal conductivity, heat transfer effect, toughness, and strong processability, so it is widely used in the field of refrigeration. In the installation of central air conditioning, the role of copper tube is to connect the inner and outer units, forming a closed system between them. The refrigerant circulates in the copper tube, realizing the cooling and heating of the room. Thermal insulation cotton (copper pipe insulation) has two functions, which are insulation and prevention of temperature loss. Without insulation cotton, the air conditioning effect will be directly affected, and condensation will occur during air conditioning cooling. The accumulated water droplets will fall onto the ceiling, damaging the aesthetics To prevent copper pipes from aging, if exposed for a long time, the copper pipes will oxidize and turn black, reducing their service life.

When the air conditioner is running in a cooling state, condensation water will be generated. The function of the condensation water pipe is to remove the condensation water in the water tray of the fan coil unit (or air conditioner). Generally, the condensate pipe is hidden in the ceiling and enclosed. The thermostat is an important component of central air conditioning, which has four major function keys: on key, mode key, wind speed key, and temperature setting key. The mode key is used to set whether to cool or heat, while the wind speed key and temperature setting key can be used to set the desired wind speed and temperature according to personal preferences. Any different place can freely control the temperature through it. Central air conditioning vents are end devices used for air supply and return in central air conditioning systems, and are a type of air distribution equipment. The air supply outlet sends cooled or heated air into the room, while the return outlet sucks in polluted air from the room, forming a complete air cycle to achieve indoor cooling and heating. There are mainly three types of air vents on the market now: aluminum alloy, wood, and ABS plastic. The above are the main accessories of central air conditioning. In addition to some of the accessories mentioned above, central air conditioning also has metal soft joints, supports and hangers, signal wires, ball valves and other accessories. Although they are all small accessories, they are not suitable for installation in central air conditioning. Therefore, when choosing a central air conditioner, users should not only look at the host equipment, but also pay attention to whether the accessories and product configurations are complete